A special cleaner from the LITHOFIN-line of professional use products. Lithofin ASR is a strongly alkaline heavy duty cleaner, which is formulated on the basis of highly active, biologically degradable cleaning components and solubilisers. The product is free of solvents, and it does not develop any unpleasant or harmful vapours.
Properties
Lithofin ASR dissolves and removes most stubborn engrained dirt as well as grease and oil, wax, paint, soot, care product encrustations, burnt-in grease, polymer films, etc.
Technical Data:
Density: ca.1.2 g/cm³
pH-Value: 14 (concentrate)
Appearance: liquid, yellowish, clear
Odour: non-specific
Solubility in water: complete
Field of Use
For intensively cleaning and de-greasing ceramics and porcelain, brick, natural, engineered and concrete stone. Suitable for indoor and outdoor use.
Directions for Use
Dilute Lithofin ASR up to approx. 1:3 to 1:5 with cold water, apply it to the surface and allow it to work for approx. 5 to 15 minutes. Brushing increases the effectiveness of the product. Then rinse the surface several times with clear water, making sure that no product residues remain. If you are not satisfied with the result, repeat this procedure either with a stronger concentration or with longer working times. Do not allow the product to dry on the surface, if necessary add some water and brush.
Please Note: we highly recommend testing the product in an inconspicuous area prior to use. Do not use on polished marble, resin-bonded stone and other surfaces sensitive to alkaline products, such as aluminium, some plastics, lacquered surfaces, etc.
Coverage: 10 to 20 m² per litre when used undiluted, up to approx. 100 m²/litre when used diluted.
Storage
Keep cool and closed. Shelf life of up to 5 years.
Environmental Protection
Surfactants are biologically degradable in accordance with EU-regulations.
Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection systems.
Safety
Contents: anionic surfactants; non-ionic surfactants; NTA; alkali; perfume; auxiliary agents.
Label according to EU-Directive 1999/45/EG: Symbol C, corrosive.
Risk and Safety Phrases: causes severe burns. Keep locked up and out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable protective clothing, gloves and eye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
First Aid Procedures: remove contaminated soaked clothing immediately. In case of inhalation, take in fresh air. In the event of symptoms refer for medical treatment. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. In case of ingestion, do not induce vomiting. If swallowed by mistake drink plenty of water and seek medical treatment.
Emergency Procedures: in case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). Product does not burn, fire-extinguishing activities according to surrounding. Do not use full water jet for safety reasons.
Additional Information is listed on the Material Safety Data Sheet.
ADR2003 | ||
Unit | Label | Notes on freight papers |
---|---|---|
a, b | UN1719 | none, due to limited quantities |
Packaging
a) 1 litre bottle with child-proof cap (12 per box)
b) 5 litre canister (4 per box)
Please Note: statements concerning environmental and safety issues refer to the product as delivered (concentrated). This information should be considered to be informal and non-binding. The products must be used according to local conditions and materials. Always test the product in an inconspicuous area. (AUS/NZ7.11gps/7.11)