A special product from the LITHOFIN-Range for ceramic and porcelain tiles (KF). Lithofin KF Intensive Cleaner is a strong alkaline product based on highly active and biologically degradable components.
Properties
Lithofin KF Intensive Cleaner dissolves and removes stubborn ingrained dirt, oil and grease, rubber, polymers and waxes, care product residues, etc.
Technical Data:
Density: approx. 1.1 g/cm³
pH-Value: >12
Appearance: liquid, yellowish
Odour: pleasant
Flash Point: >65°C
Solubility in Water: complete
Field of Use
For basic and thorough cleaning of surfaces and for regular use on surfaces subject to heavy wear and tear where care with Lithofin KF Vitra-Clean is not sufficient. Suitable for all porcelain and ceramic tiles.
Directions for Use
Dilute Lithofin KF Intensive Cleaner up to 1:10 with cold or lukewarm water and distribute evenly on the surface with a brush or scrubber. Allow the product to work for 10 to 20 minutes, brushing occasionally and not allowing the product to dry. Remove from the surface with a cloth or with a wet and dry vac and rinse the surface with clear water. When used as a regular maintenance product: use approx. 300 to 400ml per 10 L of water for a surface of 100 to 150m². Wipe the surfaces wet so dirt can be dissolved and removed.
Please Note: do not use on polished marble and other surfaces sensitive to alkali. Always try the product in an inconspicuous area prior to use.
Coverage: Approx. 10 to 15m² when used undiluted Approx 50 to 300m² depending on dirt and dilution rate.
Note
For regular maintenance on surfaces subject to normal levels of wear we recommend using Lithofin KF Vitra-Clean. Using Lithofin KF Active-Clean from time to time is advisable in areas with hard (calcium rich) water.
Storage
Keep closed, cool and dry.
Shelf life of up to 5 years.
Environmental Protection
Surfactants are biologically degradable in accordance with EU-regulations.
Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection systems.
Safety
Contents: Sodium hydroxide, surfactants, auxiliary agents.
Labeling according to VO(EG) Nr.1272/2008(CLP): Danger
May be corrosive to metals. Causes severe skin burns and eye damage. Keep out of reach of children. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: rinse mouth. Do NOT induce vomiting. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. Dispose of contents and container in accordance with national/local regulations.
Additional information is listed on the Material Safety Data Sheet.
| ADR2009: Labeling for transport | ||
| Unit | Label | Notes on freight papers |
|---|---|---|
| a.) b.) c.) | UN1719 Z8, UN1719 | none, due to limited quantities Caustic alkali liquid, n.o.s. (Sodium hydroxide), 8, UN 1719, III |
Packaging
a.) 1 litre bottle with child-proof cap (12 per box)
b.) 5 litre canister (4 per box)
c.) 10 litre canister (2 per box)
Please Note: statements concerning environmental and safety issues refer to the product as delivered (concentrated). This information should be considered to be informal and non-binding. The products must be used according to local conditions and materials. Always test the product in an inconspicuous area. (AUS/NZ4.14gps/9.13)
