A special product from the LITHOFIN-Range for ceramic and porcelain tiles (KF). Lithofin KF StainStop is a water based nearly odourless impregnator consisting of a combination of high quality water and oil resistant components.
Properties
This special impregnator effectively protects the surface against staining by inhibiting the penetration of water, oil, grease and dirt. Lithofin KF Stain-Stop does not affect the appearance of the surface.
Technical Data:
Density: approx. 1,0 g/cm³
pH-Value: 3 to 6
Appearance: liquid, yellowish, clear
Odour: non specific
Flash Point: >65°C
Solubility in Water: —
Field of Use
For protecting all newly laid absorbent polished and unglazed porcelain tiles in order to facilitate maintenance. Suitable for indoor and outdoor use.
Directions for Use
The surface to be treated must be completely clean and dry. Shake Lithofin KF Stain-Stop well before use. Apply undiluted with a clean cloth or a lambs wool roller and ensure even distribution by wiping (rolling) over the surface several times.
For best results, treat the surface in sections of approx. 15m² at a time. After 20 minutes, completely remove any surface residues with a squeegee and then with a dry cloth.
Attention! the liquid product must sink into the stone. Immediately wipe off puddles and drips. Do not allow the product to dry on the surface. Carefully remove all residues and check against back light.
Please Note: impregnators are not suitable for all porcelain tiles. Always try the product in an inconspicuous area prior to use. Protect glass, varnished surfaces, plastics, etc. against splashes.
Coverage: up to 40m² per litre, depending on the absorbency of the surface.
Storage
Keep closed, cool and dry.
Shelf life of approx. 2 years. Open containers should be used quickly.
Environmental Protection
Solvent free, water based.
Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection systems.
Safety
Ingredients: polymers; water; auxiliary agents.
Labeling according to VO(EG) Nr.1272/2008(CLP): none
Keep out of the reach of children. Treated surfaces present no health hazard once dry.
First Aid Procedures: remove contaminated soaked
Additional Information is listed on the Material Safety Data Sheet.
ADR2009: Labeling for transport
not a dangerous good
Packaging
1 litre bottle with child-proof cap (12 per box)
5 litre canister (4 per box)
Please Note: statements concerning environmental and safety issues refer to the product as delivered (concentrated). This information should be considered to be informal and non-binding. The products must be used according to local conditions and materials. Always test the product in an inconspicuous area. (AUS/NZ5.14gps/1.14)