A special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). Lithofin MN Polish Cream is based on natural waxes, special additives and maintenance components.
Properties
Lithofin MN Polish Cream is a care product which penetrates into the surface of the stone and enhances the colour structure. With regular use, the surface can be polished to a high gloss. Surfaces become less sensitive to staining, scratches and similar blemishes. Used regularly, Lithofin MN Polish Cream is the optimal care treatment for marble, granite and other natural stones.
Technical Data:
Density: approx. 0.95 g/cm³
pH-Value: approx. 10 Flash
Point: >23°C Appearance: paste, whitish
Odour: unspecific
Solubility in Water: not soluble
Field of Use
For freshening up the polish and for protecting polished natural stone surfaces, especially marble. For touching up dull areas on marble. Lithofin MN Polish Cream is highly suitable for polishing small areas such as window sills, vanity tops, kitchen work tops and similar indoor surfaces.
Please Note: on large surfaces use Lithofin MN Polish (liquid wax).
Directions for Use
Evenly apply Lithofin MN Polish Cream in circular motions using a cloth. Work in small controlled sections. After max. two minutes polish the surface with a soft cloth.
Please Note: if the product is left on the surface for too long, it becomes difficult to polish. In this case, reapply Lithofin MN Polish Cream and polish immediately.
Coverage: approx. 10 to 20m² per 500ml.
Storage
Keep closed and cool. Not above 25°C, keep tin firmly closed. Shelf life of up to two years.
Further Maintenance
For regular maintenance use Lithofin MN Easy-Care.
Environmental Protection
Contains solvents, free of chlorinated hydrocarbons. Surfactants are biodegradable according to EURegulations.
Disposal: 500ml containers are made of environmentally friendly tin plate, 125ml containers are made of environmentally friendly polyropylene (PP). Clean containers can be recycled through collection system.
Safety
No health concerns once dried according to studies of FMPA (Forschungs- und Materialprüfungsanstalt Baden-Württemberg).
Label according to EU-Directive 1999/45/EG: none Risk and Safety Phrases: harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Vapours may cause drowsiness and dizziness.
Keep out of the reach of children. Do not breathe vapour. Avoid contact with skin. If swallowed, seek medical advice immediately and show this container or label.
First Aid Procedures: remove contaminated soaked clothing immediately. No special measure necessary. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. In case of ingestion, do not induce vomiting. If swallowed by mistake drink plenty of water and seek medical treatment.
Emergency Procedures: in case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder).
In case of fire formation of dangerous gases possible. Product does not burn, fire-extinguishing activities according to surrounding.
Additional Information is listed on the Material Safety Data Sheet.
ADR2003: not a dangerous good.
Packaging
125ml tin (20 per box)
500ml tin (10 per box)
This information should be considered to be informal and non-binding. The products must be used according to local conditions and materials. Always test the product in an inconspicuous area. (AUS/NZ7.11gps/4.11)